Turning Off The Main Power - Ricoh 7025 Operating Instructions Manual

Turning Off the Main Power

Turn off the main power as follows:
Important
❒ If the operation switch indicator is lit or flashing, do not turn off the main
power switch. Doing so might damage the memory, leading to malfunctions.
❒ Make sure to turn off the main power switch before pulling out the power plug.
Not doing so may result in damage to the memory, leading to malfunctions.
A
Make sure the operation switch indicator is not lit.
B
Open the main power switch cover, and then turn off the main power
switch.
The main power indicator goes out.
Note
❒ When the main power switch is turned off while using the fax function,
waiting fax and print jobs may be canceled, and incoming fax documents
may not be received. If you have to turn off this switch for some reason,
make sure 100% is shown as available memory on the screen before turn-
ing off the main power switch or unplugging the power cord. Fax files in
memory are deleted twelve hours after you turn off the main power switch
or unplug the power cord.
Reference
"Turning Off the Main Power / In the Event of Power Failure", Troubleshooting
Turning On the Power
29
1