Ricoh 7025 Operating Instructions Manual page 419

❖ When placing the original so that the top edge touches the top left of the expo-
sure glass
When using the machine as a network TWAIN scanner, this orientation is
the standard setting for the TWAIN driver. This orientation is suitable for
most originals.
1.
Positioning mark
C
Lower the exposure glass cover or the ARDF.
D
Select the original orientation according to the orientation of the placed
original.
Reference
p.49 "Specifying original orientation and setting originals"
Placing in the Auto Document Feeder
The ARDF allows you to place multiple originals at once. Originals placed in the
ARDF can be scanned on one side or both sides.
❖ Originals that can and cannot be placed in the ARDF
For details about originals that you can place in the ARDF, see Copy Refer-
ence.
Attempting to feed unsuitable originals into the ARDF can result in misfeeds
and damage to the originals. Place such originals directly on the exposure
glass.
A
Adjust the original guide to match the size of the originals.
B
Place the originals with the side to be scanned facing up.
To scan both sides of an original, place the original so that its first side is face up.
There are two orientations.
ABF008S
Setting Originals
2
51