Cornelius FCB - 2 Flavor Service Manual page 27

Menu 8 - VISC SET (Set Cylinder Viscosity)
Selection
Pointer
Cylinder
Numbers
The desired viscosity (thickness) of the product in each cylinder is set from this menu. The viscosity set
point can be set between 1 and 9. A viscosity setting of 1 produces a very thin watery product and a set-
ting of 9 produces a very thick icy product. The factory default is 4.
VISC SET TIME Menu Button Descriptions:
#1 - BACK . . . . . . . go back to the previous menu
#2 - ALL . . . . . . . . . sets the viscosity of all cylinders to the setting of the currently selected cylinder
#3 - GO . . . . . . . . . toggle between "cylinder selection" and "viscosity setting"
#4 - UP . . . . . . . . . . increase the selected field by 1 hour or 15 minute increment
#5 - DOWN. . . . . . . decrease the selected field by 1 hour or 15 minute increment
To change the viscosity setting for a cylinder:
1. Press <UP> or <DOWN> to select the cylinder to be adjusted. The pointer will be in front of the cur-
rently selected cylinder.
2. Press <GO> to move the selection pointer to the viscosity setting for that cylinder.
3. Press <UP> or <DOWN> to increase or decrease the viscosity setting.
4. Press <GO> to move selection pointer back to the cylinder selection.
5. Repeat steps 1 - 4 for remaining cylinders.
© 2003-2014, Cornelius Inc..
Pinnacle 2 and 4 Flavor Service Manual
FIGURE 16
- 23 -
Viscosity
Settings
Publication Number: 560007298SER