Stw Alarm And Sog Alarm - Furuno FI-70 Operator's Manual

Color instrument

Hide thumbs Also See for FI-70:

Table of Contents

3. ALARMS

3.2

STW Alarm and SOG Alarm

The STW and SOG alarms set a high speed or low speed alarm threshold. When the

vessel speed goes over the high speed threshold, or below the low speed threshold,

the alarm is activated.

1. Access the [Alarms] menu, using the procedure outlined on page 3-1.

2. Press the software keys to select [STW Alarm] or [SOG Alarm], then press the

function key.

3. [Alarm] is highlighted, press the function key.

4. Select [OFF], [High] or [Low] as appropriate, then press the function key.

• [OFF]: Disable the alarm. Proceed to step 7.

• [High]: Enable the high speed alarm.

• [Low]: Enable the low speed alarm.

5. Press the software keys to select the speed threshold setting, then press the

function key.

6. Press the software keys to set the threshold as appropriate, then press the func-

tion key to apply the changes.

7. Press the Menu/Back key twice to close the menu.

3-2

STW Alarm

Alarm:

Low

10.0kn

Buzzer:

Short

Speed threshold setting

for STW or SOG

Table of Contents

Show Quick Links

Table of Contents