Engine Category - Furuno FI-70 Operator's Manual

2.3

Engine Category

NOTE: Data shown in the engine category is input from engine sensors. Always check any NOTE: Data shown in the engine category is input from engine sensors. Always check any
malfunction at the engine, do not rely solely on the FI-70 indications. malfunction at the engine, do not rely solely on the FI-70 indications.
RPM
3280
1
Eng. Temp. ºF
136
x1000
2600
Two engine display
This category displays various engine information for up to three engines.
For details on engine status indicators, see "Engine Error Icons" on page 6-4.
Press the function key to cycle through the following data on the Engine display:
Displayable data
Eng. Temp.
Fuel Used
Fuel Rate
Boost
Eng. Hour
Oil Press.
Oil Temp.
Coolant P
E Load
Gear Oil T
Gear Oil P
2. DISPLAY CATEGORIES AND CATEGORY SPECIFIC MENUS
x1000
Eng. Temp.
125.6
-16
°F °F
x1000
3320
Displays the engine temperature.
Displays the amount of fuel used.
Displays the consumption rate of fuel.
Displays the boost psi.
Displays the engine hours.
Displays the oil pressure.
Displays the oil temperature.
Displays the coolant pressure.
Displays the engine load.
Displays the gear oil temperature.
Displays the gear oil pressure.
Engine RPM
1
Currently selected gear is highlighted.
2
F: Forward, N: Neutral, R: Reverse
Status indications
3
Press function key to
4
change data displayed.
3
Eng. Temp. ºF
293 193 -13
4
1
2
RPM
3530
1
Three engine display
Description
2500 1350
2-3