How To Adjust The Sharing Level - Furuno FI-70 Operator's Manual

4. SYSTEM MENU
4.1.1

How to adjust the sharing level

1. Access the System menu using the procedure outlined on page 4-1.
2. Press the software keys to scroll through the menu and select [Sharing], then
press the function key.
3. Press the software keys to select [Stand Alone], [Slave] or [Master], as
appropriate, then press the function key to apply the setting.
Setting
[Stand Alone]
[Slave]
[Master]
4. Press the Menu/Back key to close the menu.
4-2
System
Key Beep:
Panel Dimmer:
Sharing:
Group:
Ent
Disables sharing of settings.
TZtouch2 unit (or FI-70 set as a Master unit) settings are passed to the
FI-70 unit.
This unit's settings are passed to all slave FI-70 units. Where a
TZtouch2 unit is in the same network, the TZtouch2 unit is
automatically assigned as the [Master] and this option is not available.
OFF
Stand Alone
8
Stand Alone
Slave
A
Master
Description