Furuno FI-70 Operator's Manual page 48

4. SYSTEM MENU
Where [Number of Engine] is set to [3]
[Engine PORT]: Select the engine to use as the port-side data source.
[Engine STBD]: Select the engine to use as the starboard-side data source.
[Engine Center]: Select the engine to use as the center data source.
Engine selected
at [Engine PORT]
6. Press the Menu/Back key twice to close the menu.
How to update the engine list [Engine Refresh]
When an engine is removed for service, or when the FI-70 otherwise loses connection
with the engines, it is important to update the engine list. The [Engine Refresh]
function checks the CAN bus/NMEA2000 network for connected engines and updates
the engine list.
4-6
Engine selected at
[Engine Center]
Eng. Temp. ºF
293 193 -13
RPM
3530 2500 1350
Three engine display
Engine selected
at [Engine STBD]