Speed Category - Furuno FI-70 Operator's Manual

2. DISPLAY CATEGORIES AND CATEGORY SPECIFIC MENUS
2.2

Speed Category

Speed Thru Water (STW) screen
10 15
STW
5
0
This category displays the ship speed data on the needle meter. When there is no
speed data input to the FI-70, the current speed indicator (needle) is not displayed.
The Speed category has two available screens: STW and SOG. See "How to set up
pages" on page 1-7 to set the screens.
Press the function key to cycle through the following data on the Speed display:
Displayable data
STW
STW Max*
STW Avg.*
SOG
SOG Max*
SOG Avg.*
VMG
*: The average and maximum values are calculated from when the FI-70 is turned on.
All calculations for average and maximum are reset when the power is turned off.
2-2
Current speed
20
Press the
kn
function key
SOG
17.8
data displayed
Displays Speed Through Water (STW).
Displays maximum STW.
Displays average STW.
Displays Speed Over Ground (SOG).
Displays maximum SOG.
Displays average SOG.
Displays Velocity Made Good (VMG).
Note: VMG is unavailable in SOG mode.
Speed Over Ground (SOG) screen
to change
Description
10 15
SOG
20
5
kn
STW
17.8
0