Initialize - SATO CL408 Operator And Technical Reference Manual

Section 4. Programming Reference
Memory Card Function
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 4-94

Initialize

<ESC>BJFaaaaaaaa
aaaaaaaa = Eight character alphanumeric user ID
Example: <ESC>BJFsatocard
Placement: Immediately following the <ESC>CC Slot Select
command.
Default: None
This clears all of the data from Memory Card in the specified slot and
prepares the card to accept data.
<ESC>A
<ESC>CC2<ESC>BJFsatocard
<ESC>Z
There is no printer output as a result of this command.
1. You must have the optional memory card to use this command. Call
your local SATO representative for information.
2. All Memory Cards must be initialized before they can be used for
the first time.
3. Care should be exercised when using this command as it destroys
any data previously written to the card. It will clear all data from
the card and assign the new ID ("satocard" in the above example).
9001035 Rev. E SATO CL Series Printers