SATO CL408 Operator And Technical Reference Manual page 72

Resolution
Max Print Width
Max Label Width
Std Print Length
Expanded Print Length
using <ESC>AX
command
Expanded Print Length Using Memory Card
128 Kbyte
512 Kbyte
1 Mbyte
2 Mbyte
(1). Limited by number of digits in command field.
(2). When a Memory Card is used to expand the print length, the card capacity is used
instead of the internal memory, not in addition to the internal memory.
against the inside left edge of the printer as viewed from the front of the printer. The
normal reference point is located at the H1, V1 position of the print area in the
normal print orientation (no rotation).
There are two methods available to make sure your printed output will appear
correctly on your label. They are as follows:
1. Send the Base Reference Point command as part of your data to the printer to set a new
base reference point for your label.
Calculate the distance (in dots) from the normal base reference point to the closest edge
of the label. For a 12 dpmm printer (a CL412 or CL612), this would be:
Label Width = 2" x 25.4 mm/in x 12 dpmm = 610 dots
SATO CL Series Printers
Section 4. Programming Reference
Table 4.1, Print Area
CL408 CL412
203 dpi 305 dpi
8 dpmm 12 dpmm
832 dots 1248 dots
4.1 in. 4.1 in.
104 mm 104 mm
5.0 in. 5.0 in.
128 mm 128 mm
1424 dots 2136 dots
7.0 in. 7.0 in.
178 mm 178 mm
2848 dots 4272 dots
14.0 in. 14.0 in.
356 mm 356 mm
(2)
1257 dots 838 dots
6.2 in. 2.7 in.
157 mm 69 mm
5038 dots 3359 dots
24.8 in. 10.9 in.
629 mm 278 mm
(1)
9999 dots 6720 dots
49.2 in. 22.0 in.
1249 mm 560 mm
(1)
9999 dots 9999 dots
49.2 in. 32.8 in.
1249 mm 833 mm
9001035 Rev. E
CL608 CL612
203 dpi 305 dpi
8 dpmm 12 dpmm
1216 dots 1984 dots
6.0 in. 6.5 in.
152 mm 165 mm
7.0 in. 7.0 in.
178 mm 178 mm
1424 dots 2136 dots
7.0 in. 7.0 in.
178 mm 178 mm
2848 dots 4272 dots
14.0 in. 14.0 in.
356 mm 356 mm
860 dots 528 dots
4.2 in. 1.7 in.
107 mm 44 mm
3447 dots 2113 dots
16.9 in. 6.9 in.
430 mm 176 mm
6896 dots 4227 dots
33.9 in. 13.6 in.
862 mm 352 mm
(1) (1)
9999 dots 8455 dots
49.2 in. 27.7 in.
1249 mm 704 mm
Page 4-5