Print Position - SATO CL408 Operator And Technical Reference Manual

Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
SATO CL Series Printers

Print Position

Horizontal Position:
Vertical Position:
aaaa = Number of dots horizontally from the base reference point
(1 to maximum) See Note 2.
bbbb = Number of dots vertically from the base reference point
(1 to maximum) See Note 2.
Example: <ESC>H0020<ESC>V0150
Placement: Preceding any printed field description of lines/boxes,
fonts, bar codes or graphics.
Default: <ESC>H0001
<ESC>V0001
The Horizontal and Vertical commands specify the top left corner of a
field or label, using the current base reference point as an origin.
They also establish a reference point for subsequent fields until the
next horizontal and/or vertical print position command is issued.
<ESC>A
<ESC>H0025<ESC>V0050<ESC>L0303<ESC>MCL408
<ESC>H0100<ESC>V0150<ESC>MCL408
<ESC>Q1<ESC>Z
1. The print position of a field is affected by both the Rotate (<ESC>R
and <ESC>A3) commands.
9001035 Rev. E
Section 4. Programming Reference
<ESC>Haaaa
<ESC>Vbbbb
Page 4-59