Initialize - SATO M-5900RV Operator And Technical Reference Manual

Section 4. Programming Reference
This command requires the Memory Card option.
Command Structure
<ESC>BJFaaaaaaaa
aaaaaa
Example:
Placement:
Default:
Command Function
This clears all of the data from the Memory Card in the specified slot and
prepares the card to accept data.
Input to Printer
<ESC>A
<ESC>CC2<ESC>BJFsatocard
<ESC> Z
Printer Output
There is no printer output for this command.
Special Notes
1. This command requires the Memory Card option. See your SATO
representative for details.
2. All Memory Cards must be initialized before they can be used for the first time.
3. Care should be exercised when using this command as it destroys any data
previously written to the card. It will clear all data from the card and assign the
new ID ("satocard" in the above example).
Page 4-94
Memory Card Function

Initialize

= Eight character alphanumeric user ID
<ESC>BJFsatocard
Immediately following the <ESC>CC Slot Select command
None
SATO M-5900RV Operator and Technical Reference Manual
PN 9001081
Rev. C