Character, Proportional Spacing - SATO CL408 Operator And Technical Reference Manual

Section 4. Programming Reference

Character, Proportional Spacing

Command Structure
Command Function
Printer Input
Printer Output
Special Notes
Page 4-28
<ESC>PS Set to proportional spacing
<ESC>PR Reset to fixed spacing
Example: See above
Placement: Preceding the data to be proportional spaced
Default: <ESC>PS
To specify the printing of proportional or fixed spacing for
proportionally spaced fonts.
<ESC>A
<ESC>H0025<ESC>V0050<ESC>PS
<ESC>L0202<ESC>XMPROPORTIONAL SPACING
<ESC>H0025<ESC>V0130<ESC>PR
<ESC>L0202<ESC>XMFIXED SPACING
<ESC>Q1<ESC>Z
1. Once this command is sent in the data stream, it is in effect until the
end of the print job unless a reset command is sent.
9001035 Rev. E SATO CL Series Printers