Initialize - SATO CX208 Programming Manual

CX208/212 Programming Guide
Expanded Memory Function
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 79

Initialize

<ESC>BJFaaaaaaaa
aaaaaaa = Eight character alphanumeric user ID
Example: <ESC>BJFsato
Placement: Immediately following the <ESC>CC Memory Area
Select command.
Default: None
This clears all of the data from the specified Memory Area and
prepares the area to accept data.
There is no printer output as a result of this command.
1. You must have the optional Expanded Memory to use this
command. Call your local SATO representative for information.
2. All Expanded Memory must be initialized before they can be used
for the first time.
3. Care should be exercised when using this command as it destroys
any data previously written the specified section of memory. It will
clear all data from the Expanded Memory and assign the new ID
("sato" in the above example).
PN 9001092 Rev. B
SATO CX208/212 Printers