SATO CL408 Operator And Technical Reference Manual page 30

Cl series thermal transfer printers
Hide thumbs Also See for CL408:
Table of Contents

Advertisement

STATUS:
LINE:
FEED:
DSW2-3:
LCD:
LABEL TAKEN
THRESHOLD:
OPTION CONNECTOR:
LABEL TAKEN:
SATO CL Series Printers
Section 2. Installation and Configuration
Two-color (Red, Green) LED that indicates the
following status conditions:
Green - Illuminated when printer is ready to receive
data. It is turned on and off by toggling the LINE key.
Red -Illuminated when there is a system fault such as
an open print head.
Momentary switch. Pressing this key toggles the
printer between the on-line and off-line mode. When
the printer is on-line, it is ready to receive data from
the host. This key acts as a pause during a print job by
taking the printer off-line. It can also be used as a
Pause function key to stop label during the printing
process.
Momentary switch. Pressing this key feeds one blank
label through the printer when it is off-line. When the
printer is on-line, another copy of the last label will be
printed.
Located behind the Front Access Door. DIP switch
array to set operational parameters of the printer.
DSW1 is used to set the RS232 parameters and is
located on the RS232 interface board.
2 Line x 16 Character LCD display. Used for setting
operational parameters of the printer.
Located behind the Front Access Door. This
potentiometer is used to adjust the sensing level of the
Label Taken Sensor. Active only when the Label
Dispense option is installed.
Located behind the Front Access Door. This connector
is used for the cutter and dispenser optional
accessories.
Located behind the Front Access Door. This LED is
illuminated when a label is not present in the Label
Taken Sensor. If it is not illuminated, a label has been
detected in the sensor and printing will be inhibited
until it is removed. This LED is active only when the
Label Dispense option is installed. It is used to adjust
the Label Taken Sensor threshold.
9001035 Rev. E
Page 2-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl412Cl608vaCl612va

Table of Contents