Initialize - SATO CL408 Programming Manual

Programming Manual
Command Structure:
<ESC>BJFaaaaaaaa
aaaaaaa:
Example:
Placement:
Default:
Function:
This clears all of the data from Memory Card in the specified slot and
prepares the card to accept data.
Input:
<ESC>A
<ESC>CC2<ESC>BJFsatocard
<ESC>Z
Output:
There is no printer output as a result of this command.
Note:
1. You must have the optional memory card to use this command.
Call your local SATO representative for information.
2. All Memory Cards must be initialized before they can be used for
the first time.
3. Care should be exercised when using this command as it
destroys any data previously written to the card. It will clear all
data from the card and assign the new ID ("satocard" in the above
example).
SATO RISC Printers
Memory Card Function

Initialize

Eight character alphanumeric user ID
<ESC>BJFsatocard
Immediately following the <ESC>CC Slot Select com-
mand.
None
2. Command Codes
113