General Information; Operator's Manual; Stopping The Engine - Toro Groundsmaster 4700-D Service Manual

General Information

This Chapter gives information about specifications and
repair of the diesel engine used in the Groundsmaster
4500--D and 4700--D.
General maintenance procedures are described in your
Traction Unit Operator's Manual. Information on engine
troubleshooting, testing, disassembly and assembly is
identified in the Kubota Workshop Manual, Diesel En-
gine, V2403--M--T--E3B that is included at the end of this
section.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special

Operator's Manual

The Traction Unit and Engine Operator's Manuals pro-
vide information regarding the operation, general main-
tenance and maintenance
Groundsmaster machine. Refer to these publications
for additional information when servicing the machine.

Stopping the Engine

IMPORTANT: Before stopping the engine after
mowing or full load operation, cool the turbo-char-
ger by allowing the engine to run at low idle speed
for five (5) minutes. Failure to do so may lead to tur-
bo-charger trouble.
Groundsmaster 4500--D/4700--D
intervals for your
Page 3 - - 3
tools are described in the Kubota Workshop Manual,
Diesel Engine, V2403--M--T--E3B. The use of some spe-
cialized test equipment is explained. However, the cost
of the test equipment and the specialized nature of
some repairs may dictate that the work be done at an en-
gine repair facility.
Service and repair parts for Kubota engines are sup-
plied through your Authorized Toro Distributor. If no
parts list is available, be prepared to provide your distrib-
utor with the Toro model and serial number.
Kubota Diesel Engine