O- -ring Kit
The kit includes O--rings in a variety of sizes for face seal
and port seal hydraulic connections. It is recommended
that O--rings be replaced whenever a hydraulic connec-
tion is loosened.
Toro Part Number: 16- -3799
High Pressure Hydraulic Oil Filter
If a component failure occurs in the closed loop traction
circuit, contamination from the failed part will remain in
the circuit until removed. When connecting hydraulic
test gauges in order to test traction circuit components
or after replacing a failed traction circuit component (e.g.
traction pump or wheel motor), a high pressure hydrau-
lic filter can be installed in the traction circuit. The filter
will ensure that contaminates are removed from the
closed loop and thus, do not cause additional compo-
nent damage.
A high pressure hydraulic oil filter can be obtained local-
ly.
Hydraulic System
Page 4 - - 34
Figure 31
Figure 32
Groundsmaster 4500--D/4700--D