QUANTA STRATOS S210 Series S210-X12RS Technical Manual page 98

I H
NSTALLING ARDWARE
5. Slide the 1:1 BP toward the front of the chassis until the
B2B Connector is connected to the HDD BP.
B2B Connector
Figure 2-90. Connecting the 1:1 Backplane
I HDD B
NSTALLING THE
6. Secure the 1:1 BP to the chassis with four (4) screws.
Figure 2-91. Installing the Expander Backplane Screws
7. Connect the power cable to the 10 Pin Power connector
on the HDD BP.
Power Connector
8. Connect the following cables to the 1:1 backplane:
a. 10 pin Power connector for BP with +12V, +5V, +3.3V
b. SGPIO connector 3 for HDD 8 ~ 9.
2-60
(2.5" HDD / E
ACKPLANE W O XPANDER
SKU)