Installing A 3.5" Hard Drive - QUANTA STRATOS S210 Series S210-X12RS Technical Manual

I H
NSTALLING ARDWARE
WARNING!
!
Make sure the hard drive tray handle is in the fully open
position.
3. Remove the tray from the system.
4. Remove the four (4) screws securing the hard drive to the
HDD tray.
Figure 2-10. Removing a 3.5" HDD from the Tray

Installing a 3.5" Hard Drive

1. Align the 3.5" hard drive tray with the new hard drive and
secure with the four (4) screws
Figure 2-11. Installing a 3.5" HDD on the Tray
2-7
I 3.5" H D
NSTALLING A ARD RIVE