QUANTA STRATOS S210 Series S210-X12RS Technical Manual page 215

C T
HAPTER ITLE
To open RADIUS Settings page, click Configuration > RADIUS
from the main menu. A sample screenshot of RADIUS Settings
Page is shown in the screenshot below.
Figure 4-32. RADIUS Settings Page
The fields of RADIUS Settings Page are explained below.
Table 4-27: RADIUS Settings Page
I
TEM
RADIUS
Option to enable RADIUS authentication.
Authentication
The RADIUS Port number.
Port
Note:
Default Port is 1812.
The Time out value in seconds.
Note:
Time Out
Default Timeout value is 3seconds.

Timeout value ranges from 3 to 300.

D
ESCRIPTION
4-42
W G
EB RAPHICAL
Table 4-27: RADIUS Settings Page (Continued)
I
TEM
The IP address of RADIUS server.
Note:
IP Address made of 4 numbers separated by

Server Address
dots as in "xxx.xxx.xxx.xxx".
Each Number ranges from 0 to 255.

First Number must not be 0.

The Authentication Secret for RADIUS server.
Note:
This field will not allow more than 31 charac-

Secret
ters.
Secret must be at least 4 characters long.

White space is not allowed.

Save To save the settings.
Reset To reset the modified changes.
Procedure:
1. Enable the RADIUS Authentication checkbox to authen-
ticate the RADIUS.
2. Enter the port number in the Port Number field.
3. Enter the time out value in seconds in the Time out field.
4. Enter the address of the server in the Server Address
field.
5. Enter the authentication secret for RADIUS Server in the
Secret field.
U I (GUI) ESMS
SER NTERFACE FOR
D
ESCRIPTION