Snmp - QUANTA STRATOS S210 Series S210-X12RS Technical Manual

C T
HAPTER ITLE
4. In Primary SMTP Server, enter the Server Address in
the specified field.
5. Enable the check box SMTP Server requires Authenti-
cation if you want to authenticate SMTP Server.
6. Enter your User name and Password in the respective
fields.
7. In Secondary SMTP Server, enter the Server Address in
the specific field.
8. Enable the check box SMTP Server requires Authenti-
cation if you want to authenticate SMTP Server.
9. Enter your User name and Password in the respective
fields.
10.Click Save to save the entered details.
11.Click Reset to update the entered details.

SNMP

Simple Network Management Protocol (SNMP) is an "Inter-
net-standard protocol for managing devices on IP networks."
Using MegaRAC GUI, you can configure the SNMP settings of
the device.
BMC alert could issue by SNMP trap.
W
EB
To open SNMP Settings page, click Configuration > SNMP
from the main menu. A sample screenshot of SNMP Settings
Page is shown in the screenshot below.
Figure 4-35. SNMP Settings Page
The fields of SNMP Settings Page are explained below.
Table 4-30: SMTP Settings Page
I
TEM
Enable SNMPv1/v2 Enable or disable the SNMP feature
Read-Only/Read-
Set SNMP community string for read-only and
Write Community
read-write.
String
Enable Trap Select it to make BMC send SNMP trap
Version Select which trap version to send.
4-46
G U I (GUI)
RAPHICAL SER NTERFACE
D
ESCRIPTION
ESMS
FOR