QUANTA STRATOS S210 Series S210-X12RS Technical Manual page 199

C T
HAPTER ITLE
To open DNS Server Settings page, click Configuration > DNS
from the main menu. A sample screenshot of DNS Server Set-
tings Page is shown in the screenshot below.
Figure 4-18. DNS Server Settings Page
The fields of DNS Server Settings page are explained below.
Table 4-20: DNS Server Settings Page
I
TEM
Host configuration
Host Settings Choose either Automatic or Manual settings.
It displays hostname of the device. If the Host
Host Name setting is chosen as Manual, then specify the
hostname of the device.
D
ESCRIPTION
4-26
W G
EB RAPHICAL
Table 4-20: DNS Server Settings Page (Continued)
I
TEM
Domain Name Configuration
It lists the option for domain interface as Manual,
v4 or v6 for multiLAN channels.
Domain Settings Note:
If you choose DHCP, then select v4 or v6 for
DHCP servers.
It displays the domain name of the device. If the
Domain setting is chosen as Manual, then
specify the domain name of the device. If you
Domain Name
chose Automatic, the Domain Name cannot be
configured as it will be done automatically. The
field will be disabled.
IPv4 Domain Name Server Configuration
It lists the option for v4 DNS settings for the
DNS Server Settings:
device, Manual and available LAN interfaces.
The DNS (Domain Name System) server v4
address to be configured to the device.
IP Address made of 4 numbers separated by

Preferred DNS Server
dots as in "xxx.xxx.xxx.xxx".
Each number ranges from 0 to 255.

First number must not be 0.

Alternate DNS Server
IPv6 Domain Name Server Configuration
U I (GUI) ESMS
SER NTERFACE FOR
D
ESCRIPTION