QUANTA STRATOS S210 Series S210-X12RS Technical Manual page 200

C T
HAPTER ITLE
Table 4-20: DNS Server Settings Page (Continued)
I
TEM
It lists the option for v6 DNS settings for the
device, Manual and available LAN interfaces. If
you choose Manual setting, you have to
configure the DNS Server IP addresses. If you
DNS Server Settings
have chosen DHCP, then you have to select the
interface from which the IP address is to be
received. Example of IPv6 address -
2001:db8:0:101
Preferred DNS
Specify the DNS (Domain Name System) server
Server, Alternate
v6 address to be configured to the device.
DNS Server
Save To save the entered changes.
Reset To reset the entered changes.
Procedure:
1. Choose the Host Configuration as either Automatic or
Manual.
Note:
Under Automatic, a Host Name is not necessary but under Man-
ual, a Host Name is not.
2. Enter the Host Name in the given field if you have chosen
Manual Configuration.
3. Under Register BMC,
Check the option Register BMC to register with this

DNS settings.
D
ESCRIPTION
4-27
W G
EB RAPHICAL
Choose the option Direct Dynamic DNS to register with

direct dynamic DNS or choose DHCP Client FQDN to
register through DHCP server.
4. In the Domain name Configuration Settings,
Select the domain settings from the dropdown list.

Enter the Domain Name in the given field

5. In IPv4 Domain Name Server Configuration,
Select the DNS Server Settings, from the dropdown

list.
In the Preferred DNS Server field, enter the preferred

IP address.
In the Alternate DNS Server field, enter the alternate

address.
6. In IPv6 Domain Name Server Configuration,
Select the DNS Server Settings, from the dropdown

list.
In the Preferred DNS Server field, enter the preferred

IP address.
In the Alternate DNS Server field, enter the alternate

address.
7. Click Save to save the entries.
8. Click Reset to reset the entries.
U I (GUI) ESMS
SER NTERFACE FOR