Installing A 2.5" Hard Drive - QUANTA STRATOS S210 Series S210-X12MS Technical Manual

I H
NSTALLING ARDWARE
4. Remove the four (4) screws securing the hard drive to the
HDD tray.
Figure 2-5. Removing a 2.5" HDD from the Tray

Installing a 2.5" Hard Drive

1. Align the 2.5" hard drive tray with the new hard drive and
secure with the four (4) screws
Figure 2-6. Installing a 2.5" HDD on the Tray
2. Align the tray assembly with the HDD bay and insert the
assembly  until it is fully seated in the bay.
Figure 2-7. Installing a 2.5" HDD in the System
2-5
I 2.5" H
NSTALLING A ARD
1
2
D
RIVE