Display Assembly - HP 15 Maintenance And Service Manual

▲ Remove the speakers by lifting up on the clip on the right side speaker and lifting the speakers.
Carefully and gently lift the speaker wire connecting the left and right speakers.
NOTE:
NOTE:
crucial to the performance of the speakers.
Reverse this procedure to install the speaker.

Display assembly

Description
Full display assembly, 15.6-in, BrightView, HD, LED, SVA, touchscreen
Display bezel (includes 2 rubber screws)
Raw display panel, 15.6-in, BrightView, HD, LED, SVA
Webcamera/microphone module (includes adhesive)
Display panel cable (includes webcamera/microphone module cable and two rubber screws)
Antenna Kit (includes left and right wireless antenna cables and transceivers and 2 rubber screws)
Display Hinge Kit (includes 2 rubber screws):
Display enclosure (includes 2 rubber screw covers):
The speaker connection cable was removed when removing the system board.
The speakers include rubber isolators that are installed in the screw holes. These isolators are
Spare part number
783120-001
776774-001
732080-001
776787-001
732066-001
776770-001
732072-001
776771-001
Component replacement procedures 67