Display Assembly - HP Chromebook x360 14 G1 Maintenance And Service Manual

Display assembly

Table 5-7 Display assembly description and part number
Description
Display assembly
Before removing the display assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery (see
Remove the display assembly:
1. Disconnect the display cable (1) and the touch control cable (2) from the system board.
2. Disconnect the antenna cables from the WLAN module (3).
3. Remove the display cable from the routing channel in the computer (4).
4. Remove the antenna cables from the routing channel in the computer (5).
5. Position the computer with the keyboard facing downward and the display open 90 degrees and hanging
over the edge of a table.
6. Remove the four Phillips M2.5 × 6.0 screws (1) that secure the display to the computer.
30 Chapter 5 Removal and replacement procedures for authorized service providers
(Preparation for disassembly on page
Computer feet and bottom cover on page
Battery on page 22).
Spare part number
L50833-001
20).
20).