HP 15 Maintenance And Service Manual page 57

Table of Contents

Advertisement

3.
Release the hard drive connector cable from the clips.
NOTE:
You will disconnect the hard drive connector cable from the system board when you remove
the system board.
4.
If it is necessary to disassemble the hard drive, perform the following steps:
a.
Remove the four Phillips M3.0×3.5 screws (1) from the bracket and separate the front edges of the
hard drive rubber bracket from the hard drive
b.
Disassemblying the hard drive
Component replacement procedures
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents