Insufficient Memory To Support Resource Save Feature; Insufficient Memory To Collate Job; Insufficient Memory For Flash Memory Defragment Operation; Memory Full - Lexmark C790 Series User Manual

35 Insufficient memory to support Resource Save feature

Try one or more of the following:
•
Touch Continue to disable Resource Save and continue printing.
•
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit
the menus to activate the link buffer changes. When Ready appears, enable Resource Save.
•
Install additional memory.

37 Insufficient memory to collate job

Try one or more of the following:
•
Touch Continue to print the portion of the job already stored and begin collating the rest of the print job.
•
Cancel the current print job.

37 Insufficient memory for Flash Memory Defragment operation

Try one or more of the following:
•
Touch Continue to stop the defragment operation and continue printing.
•
Delete fonts, macros, and other data in printer memory.
•
Install additional printer memory.
37 Insufficient memory, some Held Jobs were deleted
The printer deleted some held jobs in order to process current jobs.
Touch Continue to clear the message.
37 Insufficient memory, some held jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Touch Continue to clear the message.

38 Memory full

Try one or more of the following:
•
Touch Continue to clear the message.
•
Cancel the current print job.
•
Install additional printer memory.
39 Complex page, some data may not have printed
Try one or more of the following:
•
Touch Continue to clear the message and continue printing.
•
Cancel the current print job.
•
Install additional printer memory.
Troubleshooting
188