For Windows users
1
Open the Printers folder:
a
Click
, or click Start and then click Run.
b
In the Start Search or Run box, type control printers.
c
Press Enter, or click OK.
2
Select your printer.
3
Right-click the printer, and then select Properties.
4
Click the Configuration tab.
5
Click Update Now - Ask Printer or manually add any installed hardware options under Configuration Options.
6
Click Apply.
For Macintosh users
In Mac OS X version 10.5 or later
1
From the Apple menu, choose System Preferences > Print & Fax.
2
Select your printer, and then click Options & Supplies.
3
Click Driver, and then add any installed hardware options.
4
Click OK.
In Mac OS X version 10.4 or earlier
1
From the Finder desktop, choose Go > Applications.
2
Double-click Utilities > Print Center or Printer Setup Utility.
3
Select the printer, and then from the Printers menu, choose Show Info.
4
From the pop-up menu, choose Installable Options.
5
Add any installed hardware options, and then click Apply Changes.
Setting up wireless printing
Note: A Service Set Identifier (SSID) is a name assigned to a wireless network. Wireless Encryption Protocol (WEP) and
Wi-Fi Protected Access (WPA) are types of security used on a network.
Information you will need to set up the printer on a wireless
network
Note: Do not connect the installation or network cables until prompted to do so by the setup software.
•
SSID—The SSID is also referred to as the network name.
•
Wireless Mode (or Network Mode)—The mode will be either infrastructure or ad hoc.
Additional printer setup
39