Lexmark C790 Series User Manual page 41

Make sure the printer and computer are fully on and ready.
Do not connect the USB cable until instructed to do so on the computer screen.
2
Insert the Software and Documentation CD.
3
Click Recommended Install, and then follow the instructions on the computer screen.
4
Select Wireless connection when asked to choose a connection type.
5
From the Wireless Configuration dialog, select Guided Setup.
Note: Choose Advanced Setup only if you want to customize your installation.
6
Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so
you can print wirelessly.
7
Follow the instructions on the computer screen.
8
To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step
8 for each computer.
Additional printer setup
41