Insufficient Memory To Support Resource Save Feature; Printer Service Required; Insufficient Memory To Collate Job; Insufficient Memory For Flash Memory Defragment Operation - Lexmark C925 User Manual

Troubleshooting
•
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper
is large enough for the data being printed.
•
Cancel the print job.

35 Insufficient memory to support Resource Save feature

Try one or more of the following:
•
Touch Continue to disable Resource Save and continue printing.
•
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the
menus to activate the link buffer changes. When Ready appears, enable Resource Save.
•
Install additional memory.

36 Printer service required

Touch Continue to clear the message or contact customer support.

37 Insufficient memory to collate job

Try one or more of the following:
•
Touch Continue to print the portion of the job already stored and begin collating the rest of the print job.
• Cancel the current print job.

37 Insufficient memory for Flash Memory Defragment operation

Try one or more of the following:
•
Touch Continue to stop the defragment operation and continue printing.
•
Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.
37 Insufficient memory, some held jobs will not be restored
The printer deleted some held jobs in order to process current jobs.
Touch Continue to clear the message.
37 Insufficient memory, some Held Jobs were deleted
The printer deleted some held jobs in order to process current jobs.
Touch Continue to clear the message.
171