Empty The Hole Punch Box; Insert Staple Cartridge; Insert The Hole Punch Box; Install Envelope Feeder - Lexmark C790 Series User Manual

Empty the hole punch box

1
Empty the hole punch box.
For instructions on emptying the hole punch box, from the printer control panel touch More Information.
2
Reinsert the hole punch box into the finisher, and then touch Continue to clear the message.
Error reading USB drive. Remove drive.
An unsupported USB device has been inserted. Remove the USB device, and then install a supported one.

Insert staple cartridge

Try one or more of the following:
•
Insert a staple cartridge.
•
Touch Continue to clear the message and print without using the staple finisher.
Insert Tray [x]
Insert the specified tray into the printer.

Insert the hole punch box

Insert the hole punch box into the finisher, and then touch Continue to clear the message.
Install bin [x]
Try one or more of the following:
•
Install the specified bin:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Install the specified bin.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.

Install envelope feeder

Try one or more of the following:
•
Install the envelope feeder:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Install the envelope feeder.
Troubleshooting
182