Lexmark C790 Series User Manual page 138

Menu item
Paper Saver
Off
2-Up
3-Up
4-Up
6-Up
9-Up
12-Up
16-Up
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver Border
None
Solid
Staple Job
Off
On
Hole Punch
Off
On
Hole Punch Mode
2 holes
3 holes
4 holes
Offset Pages
None
Between Copies
Between Jobs
Description
Specifies that multiple-page images be printed on one side of a paper
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Specifies the positioning of multiple-page images when using Paper Saver
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they are in
portrait or landscape orientation.
Specifies the orientation of a multiple-page document
Note: Auto is the factory default setting. The printer chooses between portrait and
landscape.
Prints a border around each page image when using Paper Saver
Note: None is the factory default setting.
Specifies whether printed output is stapled
Note: This menu item only appears if the printer is equipped with a stapler.
Specifies whether printed output has punched holes
Note: This menu item only appears if the printer is equipped with a puncher.
Determines the type of punch finishing performed on a printed output
Notes:
•
3 holes is the US factory default setting. 4 holes is the international factory
default setting.
•
This menu item only appears if the printer is equipped with a puncher.
Offsets pages at certain instances
Notes:
•
None is the factory default setting.
•
Between Copies offsets each copy of a print job if Collate is set to On. If Collate
is set to Off, each set of printed pages are offset, such as all page 1's and all page
2's.
•
Between Jobs sets the same offset position for the entire print job regardless
of the number of copies printed.
•
This menu item only appears if a stapler option is installed.
Understanding printer menus
138