®
Invacare
- FDX
8.16.7 Replacing the travelling armrest
Requirements:
● 4 mm Allen key
Dismantling the travelling armrest
●
Undo and remove the four Allen screws in the backrest plastic cover using a 4 mm Allen key.
●
Remove the plastic cover.
●
If necessary, remove the remote together with its cable.
●
On the torque support, loosen the locating pin (3) bolt (2) with a 4 mm
Allen key.
●
Raise the armrest slightly and remove the locating pin.
●
Pull the armrest out of the torque support to the side. If you raise and lower the armrest a few
times it is easier to remove.
●
Replace the armrest.
Refitting the travelling armrest
●
Replace the parts in the reverse order.
●
To complete, check all vehicle functions.
The new armrest will need to be adjusted to suit the user. Please refer to the mobility device
operating manual for detailed information.
SERVICE MANUAL
143