®
Invacare
- FDX
8.14.3 Replacing the electrically operated centre-mounted legrest LNX (Modulite
seat)
WARNING: Danger of crushing!
The legrest is very heavy. Danger of injury to hands and feet!
● Pay attention to the heavy weight.
Requirements:
● 4 mm Allen key
● 10 mm ring spanner or jaw spanner
Uninstalling the electrically operated centre-mounted legrest LNX:
●
If possible, raise the lifter to the highest position.
●
If possible, tip the wheelchair with the tilt module as far backwards as it will go.
●
Switch the electronic control system off.
●
Pull the plug of the legrest actuator out of the actuator module.
●
Loosen the screws (3) with a 6 mm Allen key. Pull the entire legrest (2) forwards out of the
seat frame profile.
●
Loosen and remove the screws (1) including the nuts and washers with a 4 mm Allen key and
a 10 mm ring spanner or jaw spanner.
●
Replace the legrest (2).
SERVICE MANUAL
125