Repair Work; Covers - Invacare FDX Service Manual

®
Invacare - FDX
8

Repair Work

CAUTION!
Danger of injury and damage to property, if the maximum speed reduction on a
wheelchair with a lifter does not function correctly!
● The wheelchair's control unit must reduce the maximum possible speed as soon as the lifter
is raised.
● Test the maximum speed reduction for correct function after any maintenance work or
modifications to the wheelchair.
8.1

Covers

8.1.1 Open front cover
Removing the front cover:
●
Remove the leg rests.
●
Loosen and remove both of the knurled head screws (1).
●
Press the front cover (2) slightly upward, then pull the cover forward and off.
Installing the front cover:
●
Assemble the parts in reverse order.
●
When installing the plastic cover, make sure that the slots on the sides (3) and the lower hooks
on the cover latch onto the chassis (4).
●
Tighten both knurled head screws hand-tight.
SERVICE MANUAL
35