Service Procedures; Replacing Back Upholstery; Replacing Seat Sling Upholstery - Invacare Top End Eliminator User Manual

Invacare® Top End®

10 Service Procedures

10.1 Replacing Back Upholstery

1. Unlatch the fastening flaps A that secure the back
upholstery B to the racing chair frame.
2. Unlatch the bottom of the back upholstery C from the
seat sling upholstery (Not Shown).
3. Remove the existing back upholstery from the racing
chair.
4. Feed the top two fastening flaps of the new back
upholstery through the slots E on the racing chair
frame.
42
Fig. 10-1
5. Feed the bottom fastening flap of the new back
upholstery between the racing chair frame and the
clothing guards.
6. Adjust the back upholstery to the desired tautness.
7. Adjust the back upholstery to the desired tautness.
• TIGHTER - upholstery will increase the stability
and maintain normal maneuverability of the racing
chair because the user is pushed forward in the
racing chair slightly.
• LOOSER - upholstery will increase the
maneuverability and make the racing chair less
stable because additional weight is being distributed
onto the rear wheels.

10.2 Replacing Seat Sling Upholstery

Fig. 10-2
60001470-A