Adding Borders To Images - Sony DFS-900M Operating Instructions Manual

Change aspect in the X axis direction
Change aspect in the Y axis direction
Change aspect in the Z axis direction
Change aspects
Operation Knob Parameter
Specify an F2 X (Aspect X)
aspect in the X
axis direction.
Specify an F3 Y (Aspect Y)
aspect in the Y
axis direction.
Specify an F4 Z (Aspect Z)
aspect in the Z
axis direction.
Crop sub menu parameters
You can crop the top, bottom, left, and right edges of
images by specified amounts. To do so, adjust the
following parameters.
Crop width
Operation
Specify the crop
width for the left
side.
Specify the crop
width for the right
side.
Specify the crop
width for the top
side.
Specify the crop
width for the
bottom side.
Setup sub menu parameters
Set the following parameters.
Operation
Enable or disable
DME (same
function as the
DME ENABLE
button in the
KEYER block
(see page 14)).
Settings
0.000 to 8.000
Enable or disable
global
coordinates.
0.000 to 8.000
a) When you are setting up a transition
b) When you are setting up a key
0.000 to 8.000

Adding Borders to Images

Use the sub menus of the Border sub menu to do the
following.
Sub menu
xxx Border Color
(Border Color)
M/E DME Inner Width
Keyer Bord Inner Wid
(Inner Width)
M/E DME Outer Width
Keyer Bord Outer Wid
(Outer Width)
M/E DME Border Soft
Keyer Bord Softness
(Softness)
Crop width
Crop example
Knob Parameter Settings
F1 L (Left Side) 0.0 to 100.0
F2 R (Right Side) 0.0 to 100.0
F3 T (Top Side) 0.0 to 100.0
F4 B (Bottom 0.0 to 100.0
Side)
Knob Parameter Settings
F1 DME Off: Disable
DME
On: Enable
DME
On-woK:
Disable DME
for keys
On-w/K: Enable
DME for
keys
F2 Glbl (Use On: Enable
Globals) Off: Disable
Operation
a) Select whether to add a border
to an image, and adjust the color
of the border, if added.
b) Adjust the widths of the inner
,
sides of the border.
c)
Adjust the widths of the output
b)
,
sides of the border.
c)
b) Adjust the softness of the inner
,
and outer sides of the border.
c)
Customizing DME Effects
a)
b)
b)
137