Sony DFS-900M Operating Instructions Manual page 145

(xxx: "M/E DME" appears if you are setting up a
transition, and "Keyer" appears if you are setting up a key.)
xxx Splits 1 (1)
Operation Knob Parameter
Select the type F1 Typ (Type)
of division.
Specify the F2 Rot
rotation angle of (Rotation)
the divisions
(when Multi is
selected).
Adjust the F3 Spl (Spiral)
distance
between the
parts when
dividing into a
spiral.
Adjust the F4 Stg
displacement (Stagger)
between parts
when parts are
staggered.
xxx Splits 2 (2)
Operation Knob Parameter
Specify the F1 Num (Num_
number of Segment)
divisions (when
Multi is
selected).
Specify the X F2 PX (Position
coordinate of X)
the center point
of the division
(when Multi is
selected).
Specify the Y F3 PY (Position
coordinate of Y)
the center point
of the division
(when Multi is
selected).
Specify the F4 Amt
amount of (Amount)
movement of
the divided
area.
Mirror sub menu parameters
Adjust the following parameters to adjust the Mirror
effect.
Settings
2Way-H: Divided
into two parts,
left and right
2Way-V: Divided
The Mirror sub menu has two pages. To switch between
into two parts,
top and bottom
pages, press the h and H buttons in the numeric
4Way: Divided into
keypad.
four parts
(xxx: "M/E DME" appears if you are setting up a
Multi: Divided into
transition, and "Keyer" appears if you are setting up a key.)
multiple parts
–8.000 to 8.000
xxx Mirror 1 (1)
Operation
Specify the type
of division.
–8.000 to 8.000
–8.000 to 8.000
Specify the
rotation angle of
the mirror (when
Multi is
selected).
Settings
xxx Mirror 2 (2)
3 to 31
Operation
Specify the
number of
mirrors (when
Multi is
–8.000 to 8.000
selected).
Specify the X
coordinate of
the center point
of the mirror.
–8.000 to 8.000
Specify the Y
coordinate of
the center point
of the mirror.
Defocus sub menu parameters
–2.000 to 2.000
Adjust the following parameter to specify the level
(amount of blurring) of the Defocus effect.
Mirror effect example
Knob Parameter Settings
F1 Typ (Type) 2Way0 (2 way, 0)
2Way1 (2 way, 1)
2Way2 (2 way, 2)
2Way3 (2 way, 3)
4Way0 (4 way, 0)
4Way1 (4 way, 1)
4Way2 (4 way, 2)
4Way3 (4 way, 3)
Multi (multiple
divisions)
F2 Rot –8.000 to 8.000
(Rotation)
Knob Parameter Settings
F1 Num (Num_ 1 to 31
Segment)
F2 PX (Position –8.000 to 8.000
X)
F3 PY (Position –8.000 to 8.000
Y)
Customizing DME Effects
145