Using The Timers List; Using The Daily Schedule - Dish Network Hopper Sling User Manual

913.book Page 71 Tuesday, January 15, 2013 4:57 PM
Special Considerations When Using Timers
•
•
•
U
SING THE
To use the Timers screen to help manage your event timers, do the following:
1
Press the DVR button on your remote control four times to display the Timers List.
2
Scroll the list of timers. As you do so, detailed information about the highlighted timer
appears on the right. From the drop-down menu bar, you choose to sort the list by Priority
or select multiple Timers to edit at once (for example, to change Priority or Delete them).
Highlight and select one listed Timer if you want to see its Daily Schedule or to Delete it.
U
SING THE
To use the Daily Schedule screen to help manage your event timers, do the following:
1
Press the DVR button on your remote control three times to display the Daily Schedule.
2
Scroll the list of timers for today and the next few days. As you do so, detailed information
about the highlighted timer appears on the right. You Show or Hide events to be skipped.
Highlight and select a future program if you want to Skip or Restore an event. You can
also choose to Protect the recording, or edit the Start Early or End Late timer settings.
•
•
•
For Locked or Restricted Programs—You must enter the receiver password before
you can create an automatic event timer for a program restricted by rating or on a
locked or hidden channel. If you do this, and the restrictions or locks are subsequently
changed, then when the timer starts, note that the receiver may display only an error
or password-entry menu screen.
For Pay-Per-View Programs—You must order a Pay-Per-View program or event at
the time that you create an event timer for it.
For Blacked Out Programs—If you set a timer for a program or event that is blacked
out in your area, then when the timer occurs, the receiver may only display an error.
Note that the original provider of a program or event decides the black-out restrictions,
not DISH.
T L
IMERS IST
D S
AILY CHEDULE
To edit the Start Early/End Late settings for an individual occurrence, select its event
timer and then select Edit Event. To edit an event's associated timer, select it and
then select Edit Timer. This will access the Timers List with the Timer highlighted.
If the program is included in a Seek & Record™ timer, you cannot change the Start
Early or End Late times for an individual occurrence; it must be changed within the
Seek & Record™ timer, selected from the full Timers List. Refer to page 72.
If the PrimeTime Anytime™ feature is enabled, you will see it on the Daily Schedule.
You cannot edit an individual event or settings from this screen. Refer to page 66.
Record Future Programs

Using the Timers List

71