Dish Network Hopper Sling User Manual page 122

913.book Page 111 Tuesday, January 15, 2013 4:57 PM
What Is Happening
You try to set up an event timer
and the receiver displays a
message noting that the
program is a Pay-Per-View
event.
You try to set up an event timer,
but the receiver displays an
Error message giving you the
option to delete an event timer
that was set up earlier.
You set up an event timer, but
the receiver does not tune to the
channel of the program, or does
not record the program.
You set up an event timer for a
program that is repeated (such
as a regularly scheduled
program), but the timer does not
operate for a showing of the
program.
You set up an event timer, but
the timer does not operate at all.
You set up a Seek & Record™
timer and you notice that you
have no space left on your My
Recordings.
You stop the operation of an
event timer for one showing of a
program that is repeated (such
as a regularly scheduled
program), but the timer
operates for the next showing.
The receiver does not display
the program name for a manual
event timer.
You set an event timer.
The event timer misses the
beginning or the end of a
program.
Possible Reason
You must order a Pay-Per-View
event before you can create an To create an event timer for the event, first order it.
event timer for it.
You already have set up the
To create a new event timer, delete one of the event
maximum number of event
timers you set up earlier.
timers.
Remember that a Reminder just reminds you that
the program is about to start. An Auto-Tune timer
You may have set up a
reminds you and tunes the receiver to the program.
Reminder, but what you should
A DVR timer reminds you, tunes the receiver, and
have set up is an Auto-Tune or a
records the program to the receiver's hard drive. A
DVR timer.
DVR timer can operate only if the receiver memory
has enough space.
Remember that a Once event timer operates just
one time. A Mon.-Fri. event timer operates Monday
through Friday on the same channel at the same
• You may have set up a timer time. A Daily event timer does the same, Monday
with an incorrect frequency. through Sunday. A Weekly event timer operates
• You may have set up a once a week on the same channel at the same time.
duplicate timer. All Episodes timers will record all episodes of that
• The timer may not be current. program, while New Episodes timers will record only
the current season. Seek & Record™ timers record
all programs matching your search term. See
Reasons Why Timers are Skipped on page 70.
• You may have several timers
set up for the same time and
• Check the Priorities as described on page 68.
the event timer you set is at a
lower priority than others.
• You may have selected New • Check the Timer Frequency as described on
Episodes and the timer you
set was for an episode that is • See Reasons Why Timers are Skipped on
not new.
The Seek & Record™ timer may
have included more matching Delete that Seek & Record™ timer and begin again.
programs than what you See page 71.
expected.
To stop all operations of a repeated event timer, you
Stopping the event timer applies
must delete the event timer.
only to the current showing of the
Note
program.
when it operates.
The receiver may not be able to
Use the Program Guide or a printed schedule to find
display a program name for a
the program name.
manual event timer.
• Use the Start Early & End Late options, except for
The program may have started a
little earlier than scheduled, or it
• Use a manual event timer to start any event timer
may have run over its scheduled
ending time.
Reference
Troubleshooting Tables
What to Do
page 68.
page 70.
: The receiver deletes a Once event timer
a Pay-Per-View event.
at the times you set yourself, except for a Pay-
Per-View event.
111