Dish Network Hopper Sling User Manual page 13

913.book Page 3 Tuesday, January 15, 2013 4:57 PM
•
•
•
Guide Conventions
•
•
•
•
•
•
Chapter 10: Hopper Extras contains instructions for programming your remote to
control your Hopper with Sling HD DVR and equipment like a TV or DVD player.
Chapter 11: User Preferences shows you how to customize your TV system.
Chapter 12: Connectivity explains how to connect your Hopper with Sling HD DVR to
your TV, as well as to other equipment you may have, such as a VCR.
The labels of the remote-control buttons are all in capital letters.
Example: Press SAT to control your Hopper or Joey.
Select means to move the highlight to an on-screen option or choice in a menu list and
then press the SELECT button on the remote control.
Example: Select the Locks option.
This user guide uses HD to refer to high definition and SD for standard definition.
In a Whole-Home HD DVR system, the TV nearest the Hopper with Sling receives
menus and programming directly from its outputs and is connected using audio/video
cables, for example an HDMI cable connected to an HDTV.
In a Whole-Home HD DVR system, one or more TV(s) located in other rooms are
connected to Joey Receivers using audio/video cables. Each Joey Receiver is linked
to a Hopper with Sling HD DVR, which provides audio/video signals via the Home
Video Network connections.
The instructions in this guide are shown in two ways:
– Instructions in the form of pictures are handy if you'd like to learn something
quickly. These instructions are numbered left to right as shown in the sample
below.
– Instructions that are written out are helpful if you'd like to learn more details.
Introduction
How to Use this User Guide
3