Dish Network Hopper Sling User Manual page 28

913.book Page 18 Tuesday, January 15, 2013 4:57 PM
Chapter 2
Controlling Other Components
•
3
Highlight and select Save when you are finished.
Limited Mode
Your remote control is programmed automatically in Limited Mode to prevent inadvertent
commands from being sent to your TV, such as an accidental channel or input change.
When you use the remote to control your TV in Limited Mode, you will only be able to use
the POWER, MUTE, and VOLUME buttons. Also, when you use the remote to control your
VCR (using the mode button for a DVD or AUX device) in Limited Mode, you will only be
able to use the POWER and VCR-function buttons (like PLAY, PAUSE, etc.).
Turning Limited Mode On and Off
To turn off Limited Mode so that you can use all of the buttons on your DISH remote to
control your TV or disc player, do the following:
1
Press MENU, highlight and select the Settings tile, and then Remote Manager.
2
Highlight and select the option for Limited Mode:
•
•
3
Highlight and select Save when you are finished.
Note: Limited Mode is not used if an audio amplifier is programmed in AUX mode.
18
enabled, only the POWER and VCR-function buttons (like PLAY, PAUSE, etc.) will
operate your device.
Select AUX Code and follow the on-screen instructions to program the remote in AUX
Mode to control your auxiliary device, like an audio component or amplifier. You can
also program AUX mode to control a second TV or disc player, or even certain other
DISH receivers (via IR commands only).
Select Enabled to turn Limited Mode on. This is the default setting.
Select Disabled to turn Limited Mode off. Now more of the remote-control buttons
function in TV and DVD modes.