User 1 And 2 Displays; Selecting A Range; Range Adjustment Method; Manual Range Adjustment - Furuno FCV-1150 Operator's Manual

1.4.4

User 1 and 2 displays

The user displays let you customize displays
as desired. Two displays are provided and the
default settings for each are
User 1 display: This screen is split vertically
three ways and is comprised of LF, HF and
MIX displays.
User 2 display: This display is split in fourths
and is comprised of LF, HF, LF bottom zoom
and HF bottom zoom displays.
MANUAL L:2.0/H:2.0 LF/HF/MIX
0
20
40
49.6
m
60
Low High
frequency frequency
display display
Default user 1 display
Low freq. display
MANUAL L:2.0/H:2.0 BZ-LF/BZ-HF
0
20
40
60
30
40
30.2
ft
Bottom zoom
display (LF)
Default user 2 display
1/2
0 0
0.0
20 20
40 40
60 60
Mix display
High freq. display
1/2
0.0
0
20
40
60
30
40
Bottom zoom
display (HF)
1.5

Selecting a Range

1.5.1 Range adjustment meth-
od
Range can be adjusted manually or automat-
ically. Automatic adjustment is useful when
you are preoccupied with other tasks and do
not have the time to adjust the display.
1. Push the RANGE control to open the auto
range setting window.
2. Use or to select Off or On as appro-
priate.
On: The range is automatically changed
to keep the bottom echo on the lower half
of the screen. Range shift and gain are in-
operative in the Auto mode. "AUTO_R" is
shown at the top left corner on the screen.
Off: The range may be chosen from eight
basic ranges. MANUAL is shown at the
top left corner on the screen.
1.5.2 Manual range adjust-
ment
1. Rotate the RANGE control to show the
range selection window.
Note: If you are using the dual frequency
display, and are set up for independent
range adjustment, push the RANGE con-
trol to switch between low and high fre-
quencies alternately. For details see Split
Range on page 31.
5
1. OPERATION
Range[LF]