Alarm Mode - Grundig SC- 660 PLL User Manual

OPERATION
2
To start the search in the desired direction press »
»TUNING
– Display: »PTY« flashes.
– If the desired programme type has been found, the corresponding pro-
gramme can be heard.
– If the programme type could not be found, »NO MATCH« appears briefly
in the display. The device returns to the previous station.
Note:
The search can be interrupted with »

Alarm mode

The device has a dynamic alarm sound, that starts with a low volume and
reaches maximum volume within a short time.
Viewing the alarm times
1
In standby press »DISPLAY« repeatedly.
– Display: in sequence: alarm time 1, alarm time 2 and the the time and the
day.
Alarm with radio station
1
Press »ON/OFF« to switch on the device from standby mode.
2
Set the radio station with
3
Set the desired wake-up volume with »
4
Activate the radio station as the alarm sound (»
»ALARM1« or »ALARM2« repeatedly until the display shows: »
»
2«.
5
Press »ON/OFF« to switch the device to standby.
– The device wakes you up at the set time with the radio station (alarm
duration is 90 minutes).
13 ENGLISH
___________________________________________
«.
»P –
TUNING« or
»P +
« or «.
« (right side of the device).
TUNING« or
»TUNING
«) by pressing
«.
1« or