Setting The Alarm Times - Grundig SC- 660 PLL User Manual

SETTINGS
Setting the week day
1
Switch the device to standby mode with »ON/OFF«.
2
Press »SNOOZE« and hold it down.
3
Set the day of the week with »
– Display: the current day.
Deactivating and activating RDS time synchronisation
1
Press »ON/OFF« to switch the device to standby.
2
Deactivate RDS time synchronisation by pressing »MEM/TIME« briefly.
– Display: »CT OFF«.
3
Activate RDS time synchronisation by pressing »MEM/TIME« briefly.
– Display: »CT ON«.
– If an RDS time signal can be received, the time and the day of the week
are updated after switching on the device.

Setting the alarm times

You can select two different alarm times. You can choose whether you want to
be woken by the radio or by an alarm tone.
1
Activate the setting by pressing »ALARM1« or »ALARM2« and holding
down.
– Display: the last alarm time set, the hours flash.
2
Set the hours with »
»ALARM1« or »ALARM2«.
– Display: the minutes flash.
3
Set the minutes with »
»ALARM1« or »ALARM2«.
______________________________________________
TUNING« or
TUNING« or
TUNING
« and release »SNOOZE«.
»TUNING
»TUNING
« and confirm with
« and confirm with
ENGLISH 8