Automatic Station Search; Manual Station Search - Grundig SC- 660 PLL User Manual

SETTINGS
When the device is connected to the mains for the first, time, an automatic
station search starts. Stations are automatically saved to the presets. At the
end of the search a demo program starts. To end the demo program, press
»ON/OFF«. The station saved on preset position 1 can be heard. If the
device receives a station that transmits an RDS time signal, the time and the
week day are set automatically, (RDS time synchronisation). This process may
last a few
minutes.
If the device could not execute the automatic station search as well as the
automatic time/week day setting due to poor reception conditions, for exam-
ple, you have to make the settings manually or select a different station.
Tuning and storing stations
A maximum of 20 stations can be stored on the presets.

Automatic station search

1
Press »ON/OFF« to switch on the device from standby mode.
– Display: the frequency band and frequency, or station name.
2
Activate the station search by pressing »
until the frequency display changes to rapid run-through forwards or back-
wards.
– The search stops when a channel is found.

Manual station search

1 TUNING« or
Press »
frequency up in steps.
– The frequency changes up or down in 50 kHz steps.
______________________________________________
»TUNING
TUNING« or
« briefly several times to move the
»TUNING «
ENGLISH 6