SAFETY, INFORMATION _____________________ ENGLISH Safety This device is designed for the playback of audio signals. Any other use is expressly prohibited. °C °C If the device is subjected to sudden changes in temperature, for example if it is brought in from the cold to a warm room, let it stand for at least two hours.
Page 3
OVERVIEW ____________________________________________ SNOOZE AL 1 AL 2 MEMORY AL 1 AL 2 MEMORY ON/OFF 5/10 SLEEP PROJECTOR ON/OFF SLEEP 5/10 PROJECTOR Controls on the top Interrupts the alarm function for approximately SNOOZE 9 minutes. The circular LED flashes when »SNOOZE« or »NAP«...
Page 4
OVERVIEW ____________________________________________ For setting the radio stations manually. For changing the selected settings such as time, date, alarm type, alarm time and alarm days. Switches the device off (stand-by) and back on. ON/OFF Interrupts the alarm stand-by (alarm time 1 and 2) for 24 hours.
Page 5
OVERVIEW ____________________________________________ The displays 3 : 32 • . 2 02.04 20 : 30 ALARM Lights up when the device is in stand-by mode. • Operation indicator. Lights up when the device is switched on. Displays the DCF time synchronisation. Displays the station position of the station you are currently playing.
Page 6
PREPARATIONS ____________________________________ Connect power cable Note: Check that the mains voltage on the type plate (on the bottom of the device) corresponds to your local mains supply. If this is not the case, contact your specialist dealer. Plug the mains cable into the socket (230 V~, 50/60 Hz). AL 1 AL 2 Note:...
“E”, earth symbol “ ”, coloured green, or green & yel- low. Replacement mains lead sets can be obtained from your local dealer, or by contacting Grundig Consumer Relations (01788 570088) Moulded 3-pin lead set, suitable for UK use: Ref: Leadset UK 8290-991-224...
SETTINGS ______________________________________________ Automatic settings Automatic station search Note: In order to interrupt the automatic settings, press »ON/OFF«. Once you have connected your device to the mains, the run-through of the frequency appears on the display. – Your device automatically searches the frequency band for radio stations.
SETTINGS ______________________________________________ Manual settings If the device was not able to carry out a station search and synchronisation due to bad reception, then you can manually set the radio stations, time and date. You should nonetheless try to improve the reception conditions by aligning the FM and DCF antenna.
SETTINGS ______________________________________________ Press »s«. – Display: The month flashes. Press »S« or »A« briefly to set the day step-by-step or hold down to run through the days quickly. Press »s«. – Display: The year flashes. Press »S« or »A« briefly to set the year step-by-step or hold down to run through the years quickly.
SETTINGS ______________________________________________ All settings can be carried out in stand-by mode. The following sections describe the settings for the first alarm programme » ALARM «. Repeat this for the second alarm programme » ALARM «. When both alarm times are activated, » ALARM «, the alarm time (e.g.
Page 12
SETTINGS ______________________________________________ Signal alarm Press » « to switch the device to stand-by mode. ON/OFF To activate the first alarm programme, press and hold down »AL 1«. – Display: e.g. » ALARM «, the alarm time (e.g. »6:00«) and the next alarm day.
OPERATION __________________________________________ Switching on and off Press »ON/OFF« to switch the device on from stand-by mode and to switch it back to stand-by mode. Radio mode For the best possible FM (VHF) reception, it is sufficient to direct the wire antenna accordingly.
Page 14
OPERATION __________________________________________ To delete further days of the week repeat steps to 6. Press »AL 1« to confirm your entry. To reinsert deleted days of the week repeat steps to 8. Note: If the alarm times for this day have expired, the next day of the week always appears in the display, to which the alarm applies with alarm time and type, regardless of the selected setting.
OPERATION __________________________________________ Deactivate alarm for the next day. You can deactivate the alarm function for the next day, for example, if that day is a public holiday. The set alarm times are saved. To deactivate the alarm function for the next day, press »SNOOZE« for more than 5 seconds.
Page 16
OPERATION __________________________________________ Switching off the sleep timer For switching off the sleep timer before the set time, switch off device with »ON/OFF« or press and hold down »SLEEP«. – Display: » « and the remaining time stop glowing. – The device switches off. Setting the reminder timer Activate the function with »NAP«.