Alarm Mode - Grundig SCC 240 Manual

OPERATION
Alarm­mode
The device has a dynamic alarm tone
that starts at a low volume and reach-
es its maximum volume within 30 to
45 seconds.
Viewing­the­alarm­time
1 »VOLUME­ -/AL­
Press
(for alarm time 1) or press
LUME­ +/AL­
2).
– Display: the last set alarm time
1 or 2, the LED
»AL­2­ ­­
Note:
If no other button is pressed, the
7
device switches back automati-
cally to the current time after
10 seconds.
Alarm­with­radio­station
1 Press »ON/OFF« to switch on the
device.
2
Select the radio station using the
»-TUNING+« dial.
3
Adjust the alarm volume by press-
ing »TUNING+/
ING-/MIN«.
­_____________________________________
1« ones
»VO-
2« (for alarm time
»AL­1­ ­­
« flashes.
HR « or »TUN-
4 Set the radio station you want as
an alarm signal (» «), and press
»AL1« or »AL­2« twice.
– Display: the corresponding LED
»AL­ 1­ ­ ­
lights up.
5 Press » ON/OFF« to switch off the
device.
– The device wakes you up at the
set time with the radio station
(alarm duration is 59 minutes).
« or
Alarm­with­signal­tone
1 Press » ON/OFF« to switch off
the device.
2
Set the signal tone alarm signal
(» «), and press »AL­1« or »AL­2«
once.
– The device wakes you up at
the set time with the signal tone
(alarm duration is 59 minutes).
Interrupting­the­alarm
1
Press »SNOOZE« while the
alarm is sounding.
– The alarm signal (radio station
or signal tone) stops.
– The alarm goes on again at
9 minute intervals (alarm dura-
tion is 59 minutes).
« or »AL­ 2­ ­ ­
ENGLISH
«
­ 1 3